KGI Securities analyst Ming-Chi Kuo, who has a respectable track record at reporting on Apple's upcoming plans, issued a note to investors on Thursday that claims the next-generation iPhone will have a FPC-made capacitive Force Touch sensor under the backlight, laminated with metal shielding. Kuo adds that the change may be significant enough for Apple to call its next iPhone the "iPhone 7" instead of the so-called "iPhone 6s."
The analyst claims that the hardware design of Force Touch will be different than the technology used in the Apple Watch and 12-inch Retina MacBook. Instead of directly detecting the pressure applied by fingers, the new improved Force Touch hardware will monitor the contact area where a finger presses to determine how much pressure is being applied. The sensor will use capacitive technology and thin FPC material to save space.
"We believe that iPhone’s Force Touch sensor doesn’t directly detect the pressure applied by fingers. Instead, it monitors the contact area on which the finger touches the screen to decide how big the pressure is.
There are two possible structural designs for Force Touch from a technology viewpoint. The Force Touch sensor can either be placed between the cover lens and the In-cell touch panel or under the In-cell touch panel’s backlight. In the first position, the technological challenge lies with how to produce the transparent Force Touch sensor; in the second position, the challenge is how to reduce signal interference from in-cell touch panel. Our understanding of the technology is that producing a transparent Force Touch sensor is more difficult, so the chances are the new iPhone this year will opt for the second position."
Kuo adds that Apple is likely to change the hardware design of Force Touch again in 2016 by removing the metal shielding to achieve a thinner form factor. He notes that the changes should improve the iPhone user experience, but will likely create uncertainty for Force Touch module suppliers TPK and GIS, as well as metal shielding suppliers Minebea, Hi-P and Jabil.
Kuo claims that Apple is still targeting 4.7-inch and 5.5-inch models for its next-generation iPhones, akin to the iPhone 6 and iPhone 6 Plus, and notes that a 4-inch model is unlikely to be released this year. KGI Securities estimates iPhone shipments will total 25 to 30 million units in the third quarter, helping drive momentum for Force Touch components within the supply chain.
Is that possible without calibration? A small finger pushing hard would register the same area as a larger finger pressing soft. I can't imagine it working like that.
My iPhone 5 better last a long time, because its looking more and more like my last.
----------
4 inches is just too small for a smartphone. There is a reason why 4.7 and up is the standard now. Because it is more practical.
Its a matter of how you use your phone. 80 percent of my phone usage would be 1 handed, which i can't do with the 6 making it useless and impractical for me. 4 inches is the perfect size.
They really should offer a 4,4.7 and 5.5 lnch range and that would satisfy everyone.
Is that possible without calibration? A small finger pushing hard would register the same area as a larger finger pressing soft. I can't imagine it working like that.
Exactly...I don't really believe this rumor because then even the original iPhone could have "Force Touch" - the capacitive screen already detects the entire contact area and the OS decides the center point to tell the app.
4 inches is just too small for a smartphone. There is a reason why 4.7 and up is the standard now. Because it is more practical. I don't think Apple is going back to 4 inches. With the iPhone 6 and 6+ success, there is no going back to smaller phones.
Thursday March 28, 2024 11:07 am PDT by Juli Clover
Apple will introduce new iPad Pro and iPad Air models in early May, according to Bloomberg's Mark Gurman. Gurman previously suggested the new iPads would come out in March, and then April, but the timeline has been pushed back once again. Subscribe to the MacRumors YouTube channel for more videos. Apple is working on updates to both the iPad Pro and iPad Air models. The iPad Pro models will...
In November, Apple announced that the iPhone would support the cross-platform messaging standard RCS (Rich Communication Services) in the Messages app starting "later" in 2024, and Google has now revealed a more narrow timeframe. In a since-deleted section of the revamped Google Messages web page, spotted by 9to5Google, Google said that Apple would be adopting RCS on the iPhone in the "fall...
Thieves in Montreal, Canada have been using Apple's AirTags to facilitate vehicle theft, according to a report from Vermont news sites WCAX and NBC5 (via 9to5Mac). Police officers in Burlington, Vermont have issued a warning about AirTags for drivers who recently visited Canada. Two Burlington residents found Apple AirTags in their vehicles after returning from trips to Montreal, and these...
Apple's WWDC 2024 dates have been announced, giving us timing for the unveiling of the company's next round of major operating system updates and likely some other announcements. This week also saw some disappointing news on the iPad front, with update timing for the iPad Pro and iPad Air pushed back from previous rumors. We did hear some new tidbits about what might be coming in iOS 18 and...
Photos of the first iPhone 16 cases have been shared online, offering another preview of the rumored new vertical rear camera arrangement on the standard iPhone 16 and iPhone 16 Plus. Image credit: Accessory leaker Sonny Dickson Over the last few months, Apple has been experimenting with different camera bump designs for the standard iPhone 16 models, all of which have featured a vertical ...
A $3 third-party app can now record spatial video on iPhone 15 Pro models in a higher resolution than Apple's very own Camera app. Thanks to an update first spotted by UploadVR, Spatialify can now record spatial videos with HDR in 1080p at 60fps or in 4K at 30fps. In comparison, Apple's native Camera app is limited to recording spatial video in 1080p at 30fps. Shortly after Apple's Vision ...
KGI Securities analyst Ming-Chi Kuo, who has a respectable track record at reporting on Apple's upcoming plans, issued a note to investors on Thursday that claims the next-generation iPhone will have a FPC-made capacitive Force Touch sensor under the backlight, laminated with metal shielding. Kuo adds that the change may be significant enough for Apple to call its next iPhone the "iPhone 7" instead of the so-called "iPhone 6s."
Top Rated Comments
Disagree. 4.7 gives me a bit more usable screen in exchange for losing 1 handed use. Not a good trade off (for me).
My iPhone 5 better last a long time, because its looking more and more like my last.
----------
Its a matter of how you use your phone. 80 percent of my phone usage would be 1 handed, which i can't do with the 6 making it useless and impractical for me. 4 inches is the perfect size.
They really should offer a 4,4.7 and 5.5 lnch range and that would satisfy everyone.
Exactly...I don't really believe this rumor because then even the original iPhone could have "Force Touch" - the capacitive screen already detects the entire contact area and the OS decides the center point to tell the app.